Publications

Peer-reviewed journal publications:

  1. Chatterjee, P., & Bryant, M. (2019). Analysis of Tension-Tunable Clamped-Clamped Piezoelectric Beams for Harvesting Energy from Wind and Vibration, Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389X19862390 (Impact factor: 2.6)
  2. Khatri, D. N., Chatterjee, P., Metoyer, R., Mazzoleni, A. P., Bryant, M., & Granlund, K. O. (2019). Dual-Actuator Disc Theory for Turbines in Yaw. AIAA Journal, 1–5. https://doi.org/10.2514/1.j057740 (Impact factor: 1.6) 
  3. Chatterjee, P., & Bryant, M. (2018). Aeroelastic-photovoltaic ribbons for integrated wind and solar energy harvesting. Smart Materials and Structures, 27(8). https://doi.org/10.1088/1361-665X/aacbbb (Impact factor: 3.5) 
  4. Chatterjee, P., & Bryant, M. (2015). Structural modelling of a compliant flexure flow energy harvester. Smart Materials and Structures, 24(094007). https://doi.org/10.1088/0964-1726/24/9/094007 (Impact factor: 3.5) 

Conference Proceedings:

  1. Khatri, D.N., Chatterjee, P., Metoyer, R., Bryant, M., Mazzoleni, A. P.,  and Granlund, K.O. (2018) Investigation of a Novel Approach for Ocean Current Power Generation: The Inclined-Axis Coaxial Turbine, OCEANS 2018 MTS/IEEE Charleston, Charleston, SC, 2018, pp. 1-7. doi: 10.1109/OCEANS.2018.8604854.
  2. Chatterjee, P., Mazzoleni, N., & Bryant, M. (2017). Experimental investigation of flow induced limit cycle oscillations in a tensioned ribbon. Proc. SPIE 10164, Active and Passive Smart Structures and Integrated Systems 2017, 1016402. https://doi.org/10.1117/12.2260184.
  3. Chatterjee, P., and Bryant, M. (2016). Aeroelastic modelling of a Piezo-solar tensioned energy harvesting ribbon. Proc. SPIE 9799, Active and Passive Smart Structures and Integrated Systems 2016, 979914. https://doi.org/10.1117/12.2222109.
  4. Chatterjee, P., & Bryant, M. (2015). Transfer matrix modeling of a tensioned piezo-solar hybrid energy harvesting ribbon. Proc. SPIE 9431, Active and Passive Smart Structures and Integrated Systems 2015, 94310D. https://doi.org/10.1117/12.2086138.
  5. Chatterjee, P., & Bryant, M. (2014). Design of a compliant flexure joint for use in a flow energy harvester. Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. Volume 2: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bioinspired Smart Materials and Systems; Energy Harvesting. Newport, Rhode Island, USA. September 8–10, 2014. V002T07A009. ASME. https://doi.org/10.1115/SMASIS2014-7503.